PLUGSTERS LC/UPC Singlemode Fiber Optic Attenuator Male/Female 3dB 5dB 7dB 10dB

Description

Connector/Connection Polish: LC/UPC Male to LC/UPC Female.
Attenuator db: 3dB or 5dB or 7dB or 10dB (you pick it)
Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable.
Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable.
Feature: Light weight, small volume, high accuracy, good stability and convenient operation.
Description
Size:
3dB to 10dB
Parameters
• Operation Wavelength:1200nm - 1600nm
• Return Loss: ≥ 50dB
• Attenuation Tolerance: ±10% dB
• Operational Temperature: -40 to+ 75°C
• Core material: Ceramic
• Using dustproof cap to protect the end-face.
• Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment.
Attenuator Applications
• Optical attenuator are a passive devices used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power fiber optic applications.